Online message

If you have any needs, please leave a message and we will contact you as soon as possible。

Set the following parameters

Base mounting

Specifications: 6 to 32

Pressure: up to 315 bar

Flow: up to 550 L/min

***********

Copy to clipboard

Configured parameter：******

Open All | Close All

NG6

• For base plate mounting mounting surface according to DIN 24340 Type A,

• ISO 4401 and CETOP 121H baseboards

• With and without drain ports

• Four opening pressures

NG10~32

• For baseplate mounting the mounting surface meets

• DIN24340 Type D and ISO5781

• For threaded connections

• With or without drain ports

• With or without uninstall function

• Four opening pressures

NG6

Weight	kg	about 0.8
Installation position		Optional
Flow direction		From A to B free, from B to A through opening
Operating pressure	bar	to 315
Control pressure	bar	5 ~ 315
Control capacity-Port X	cm³	0.68
-Port Y(only type SL)	cm³	0.58
Control area-area A1	cm²	0.42
-area A2	cm²	1.33
-area A3	cm²	0.19
Viscosity range	mm²/s	2.8 ~ 500
Fluid temperature range	℃	-30 ~ +80(NBR seal)
Fluid temperature range	℃	-20 ~ +80(FKM seal)
Fluid	Mineral oil suitable for NBR and FKM seal
Fluid	Phosphate ester for FKM seal
Degree of contamination	Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406

Be mainly used in