A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed for low leakage blocking and load holding applications.
• Continuous-duty rated coil • Efficient wet-armature construction • Cartridges are voltage interchangeable • Optional waterproof E-Coils rated up to IP69K • Industry common cavity • Hardened parts for long life and low leakage
Technical Specs
Rated pressure
350 bar (5075 psi)
Proof pressure
525 bar (7612 psi)
Peak flow
75.7 L/min (20 gpm)
Internal Leakage
≤ 0.15 mL/min(3 drops /min)@350 bar
Coil Duty Rating
Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20℃
1.7A at 12VDC; 0.85A at 24VDC
Minimum pull-in voltage
85% of nominal at 350 bar
Cavity
VC10-2
Fluid
Mineral-based or synthetics with lubricating properties
Fluid temperature range ℃
-54 to 107 ℃ (Polyurethane seals)
-40 to 100 ℃ (Buna N seals)
-26 to 204 ℃ (Fluorocarbon seals)
Viscosity range
7.4 to 420 mm2/s
Degree of contamination
The minimum pollution level is ISO4406 level 18/16/13, and level 15/13/11 is recommended to prolong the service life