Rated Pressure (bar/psi):207/3000 Max. Flow (L/min/gpm): 1.89/0.5 (See performance chart)
A solenoid-operated, two-way, normally closed, direct-acting, needle-type, screw-in hydraulic cartridge valve, designed to function as a blocking or loadholding device for low flow circuits.
• Continuous-duty rated coil • Efficient wet-armature construction • Cartridges are voltage interchangeable • Optional waterproof E-Coils rated up to IP69K • Industry common cavity • Hardened parts for long life and low leakage
Technical Specs
Rated pressure
207 bar(3000 psi)
Peak flow
See performance chart
Effective orifice size
0.81 mm (0.032 in.)
Internal Leakage
≤3 drops/min@207bar
Coil Duty Rating
Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20℃
E-Coil
1.4A at 12VDC; 0.7A at 24VDC
D-Coil
1.2A at 12VDC; 0.6A at 24VDC
Minimum pull-in voltage
85% of nominal at 207 bar (3000 psi)
Cavity
VC08-2
Fluid
Mineral-based or synthetics with lubricating properties
Fluid temperature range ℃
-54 to 107 ℃ (Polyurethane seals)
-40 to 100 ℃ (Buna N seals)
-26 to 204 ℃ (Fluorocarbon seals)
Viscosity range
7.4 to 420 mm2/s
Degree of contamination
The minimum pollution level is ISO4406 level 20/18/14, and level 17/15/13 is recommended to prolong the service life