A solenoid-operated, two-way, normally open, direct-acting, spool-type, screw-in hydraulic cartridge valve designed to function as a bidirectional blocking valve in low flow circuits.
• Continuous-duty rated coil • Both ports may be fully pressurized • Efficient wet-armature construction • Cartridges are voltage interchangeable • Optional waterproof E-Coils rated up to IP69K • Industry common cavity • Hardened parts for long life and low leakage
Technical Specs
Rated pressure
207 bar(3000 psi)
Peak flow
9.5 L/min (2.5 gpm)
Internal Leakage
≤ 82 mL/min @207 bar
Coil Duty Rating
Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20℃
1.4A at 12VDC; 0.7A at 24VDC
Minimum pull-in voltage
85% of nominal at 207 bar (3000 psi)
Cavity
VC08-2
Fluid
Mineral-based or synthetics with lubricating properties
Fluid temperature range ℃
-54 to 107 ℃ (Polyurethane seals)
-40 to 100 ℃ (Buna N seals)
-26 to 204 ℃ (Fluorocarbon seals)
Viscosity range
7.4 to 420 mm2/s
Degree of contamination
The minimum pollution level is ISO4406 level 20/18/14, and level 17/15/13 is recommended to prolong the service life