Shopping Cart
Global Site
Hengli America InLine Hydraulik Hattori Seiko Lixin Hydraulics Hengli Pneumatic Harada Seal
Language
简体中文 Deutsch Français Italiano 日本語 Русский язык Español Português
Close

Online message

If you have any needs, please leave a message and we will contact you as soon as possible。

Set the following parameters

4WRE(E) direct acting proportional directional valve

Series of pictures

4WRE(E) are operated by proportional solenoids with central thread and removalbe coil. The solenoids are optionally controlled by either external electronics (type 4WRE) or by the integrated electronics (type 4WREE).

Specification: 6/10

Pressure: up to 315 bar

Flow: up to 180 L/min

Configure model/order number

***********
Copy to clipboard
Configured parameter:******
Open All | Close All

Serial Advantage

  • Direct operated proportional directional valve with electrical position feedback

  • Closed loop control of the direction and size of a flow

  • Operation is by proportional solenoids with a central thread and removable coil

  • For subplate mounting: Porting pattern conforms to ISO 4401

  • Spring centred control spool

  • Integrated electronics (OBE) with voltage input or current input (A1 resp. F1)

  • 4WRE separate order: analogue module amplifier

Technical Specification

Hydraulic
InstallationOptional, preferably   horizontal
Nominal   size610
Weight4WRE...L2XKg2.26.3
4WREE...L2X2.46.5
Nominal   flow qnom at Δp = 10 barL/min8, 16, 3225, 50, 75
Hysteresis%≤ 0.1
Reversal   span%≤ 0.05
Response   sensitivity%≤ 0.05
Max.operating
    pressure
Ports A, B, Pbar315
Port Tbar210
Pressure fluidMineral oil (HL, HLP)   to DIN 51524
Other   pressure fluids on request!
Ambient air
temperature range
4WRA...L2X-20℃ to 70℃ (-4° F to   158° F)
4WRAE...L2X-20℃ to 50℃ (-4° F to   122° F)
Viscosity   rangemm²/s20 to 380 (preferably   30 to 46)
Fluid   Cleanliness ClassNAS1638 class9 or ISO   4406 class 20/18/15
Electrical
1)   Solenoid data
Nominal   size610
Voltage   typeDC
Command   value signal for 4WREE±10V or 4 ~ 20mA
Max.current   per solenoidA2.5
Solenoid   coil
    resistance
Cold valueΩ2.73.7
Max.warm   value4.055.55
Duty%ED100%
Max.coil   temperature150
Valve   protection to EN 60529IP 65
Control electronics
Amplifier4WRE...L2XVT-VSPA2-...-L2X
4WREE...L2Xintegrated in the   valve(OBE)
Supply   voltageNominal voltageVDC24
Lower   limiting valueV19.4
Upper   limiting valueV35
Amplifier   power
    consumption
ImaxA< 2
Impulse   currentA3

Application Industry

Be mainly used in
Close

Data Download